BESS Cabinet Enclosures & Power Distribution Housings储能柜外壳与配电箱体

We typically use cold-rolled steel (SPCC), galvanized steel, aluminum 5052/6061 or stainless steel 304/316, depending on load, corrosion resistance and thermal requirements. Finishes include powder coating, anodizing and passivation.我们通常根据承重、防腐和散热需求选用冷轧钢板（SPCC）、镀锌板、铝 5052/6061 或不锈钢 304/316；表面处理可选喷粉、阳极氧化或钝化处理。

We can design and fabricate BESS enclosures from IP20 indoor cabinets up to IP54/IP55 and IP65 outdoor housings, with sealed gaskets, cable glands, louvers and rain hoods as required.我们可以设计并制造从 IP20 室内柜到 IP54/IP55、IP65 户外柜的储能外壳，按需配置密封条、防水接头、百叶窗和防雨帽。

Send us your 3D/2D drawings or sketches, target dimensions, battery/module layout, required IP rating, thermal strategy, surface finish and estimated quantity. We return a DFM review and quote within 24 hours.请提供三维/二维图纸或草图、目标尺寸、电池/模组排布、所需 IP 等级、散热方案、表面处理和预计数量，我们 24 小时内反馈 DFM 评审与报价。

Yes. We integrate CNC punched or laser-cut openings, ventilation louvers, hinges, quarter-turn locks, swing handles, cable glands and busbar supports based on your electrical and mechanical requirements.可以。我们可根据您的电气与机械需求，集成数控冲孔或激光开孔、通风百叶、铰链、转舌锁、把手、防水接头和铜排支架。

Prototype samples are usually ready in 7–15 days, and small-batch production in 15–25 days. Mass-production schedules are confirmed after DFM approval and depend on quantity and finish complexity.打样通常 7–15 天，小批量生产 15–25 天；量产交期在 DFM 确认后根据数量和工艺复杂度确定。